You see, these days, a lot of us use nasolabial fold fillers as a non-invasive way to give us the perfect face or smile we yearn for.
There is no disputing the fact this is a great procedure. But there is still one tiny problem. Like any other facelift procedure, anything could really happen here.
So, what does that mean for you as someone about to have this procedure? Or should we say someone who has already gone through this procedure?
It means you have to be able to evaluate the outcome of your recent treatment for nasolabial fold filler and recognize any early signs of trouble. How to tell if your nasolabial fold filler gone wrong?
This all-inclusive guide will walk you through everything you need about nasolabial folds.
Once you're done reading this article, you should be abe to tell if the procedure was a success or know when the nasolabial fold filler gone wrong.
What Are Nasolabial Folds?
The folds at either side of the mouth that run down from each nostril are called Nasolabial Folds.
They occur because of reasons associated with age. This could be a failing facial skin moisture barrier systems due to reduced production levels caused mainly by loss within the middle part (cheek) area called the malar fat pad.
Although some people like dermal fillers and see them as solutions for a refreshed appearance, most individuals still need to be satisfied with their effects on smile lines.
Dermal fillers provide a non-invasive solution for adding volume to areas that reduce wrinkles and creases.
Common Types of Dermal Fillers used
There are different kinds of fillers used to fill up nasal labial furrows. Some examples include:
Hyaluronic acid-based fillers
This kind is mostly used to fill up nasolabial folds. Juvederm, Restylane, and Belotero are examples that fall under this category.
Hyaluronic acid naturally occurs in the human body, these fillers are usually well tolerated and can easily be reversed when necessary.
Calcium hydroxylapatite fillers
Such fillers e., g., Radiesse, are thicker than hyaluronic acid ones and may last longer when used alone or with others like it.
Poly-L-lactic acid fillers
This kind of filler, e.g., Sculptra, enhances the natural collagen synthesis process in your body,, leading to progressive changes over time that last for several years.
Soft tissue fillers
Other than those mentioned above, a wide array of synthetic or natural substances are used to volumize creased areas.
The choice depends on factors such as how severe your lips-to-cheek wrinkles are, what kind of skin you have underneath, and your desired result from this procedure.
Signs of a Successful Nasolabial Fold Filler Treatment
After undergoing your nasolabial fold treatment, you will expect to see some changes. A good treatment should make you look better naturally and not as if something has been done to you. Knowing when the nasolabial fold filler failed and the reason why nasolabial fold filler gone wrong.
Here are some signs that the filler injection was effective:
Enhanced facial symmetry
Improving overall facial balance is one of the key objectives of treating the nasolabial folds with fillers.
After the procedure, there is expected to be a more harmonious connection between both sides of your face.
The asymmetrical appearance of the nasolabial folds before treatment should be replaced by ones that are evenly corrected on both sides, and this contributes greatly to achieving a natural look.
The outcome should appear as if no procedure was done
When properly done, the filler treatment should improve your natural features without an artificial appearance.
Specifically, the skin around your nasal labial fold should be less wrinkled and aged but still able to move naturally while smiling or talking.
Your friends may say you look much improved, although they cannot identify what has changed.
The filler settles down gradually
It is crucial to note that what you see immediately after treatment is not the end result.
Some swelling may occur within the first couple of days post-injection, which could give an impression that the area is slightly overfilled.
As time goes by (over the next week or two), the filler will take on a smoother, more natural shape. This slow assimilation of the injected material into your tissues improves the treatment progress.
Red Flags: Indicators Your Nasolabial Fold Filler May Have Flopped
Although complications from dermal filler injections are quite uncommon if done by qualified professionals, one should still watch out for some signs.
Here are some warning signs that your nasolabial fold filler gone wrong out of the planned:
Excessive swelling beyond the normal timeframe
It is expected that there will be some swelling after every injectable filler procedure.
Nevertheless, if you observe continuous or increasing edema for more than 24-48 hours following the therapy, then this is abnormal.
Such a high amount of swelling could signify an allergic reaction or any other adverse event.
Uneven or asymmetrical results
Although perfect symmetry is hardly ever possible, significant differences in the left and right nasolabial folds may suggest a problem. This could occur due to unevenly applied fillers or variations in settling of the fillers on either side.
Lumps, bumps, or visible filler under the skin
The treated area should feel smooth to the touch once the initial swelling goes down.
Seeing distinct lumps or bumps that you can touch under your skin or noticing a bluish tint (Tyndall effect), which indicates that the filler has been injected too superficially or using too much of it, are signs that the filler has not been properly injected.
Discoloration or blanching of the skin
Any abnormal change in color, especially whitish or bluish, near the injection site, could be taken as a sign of vascular occlusion.
This is a rare but serious complication in which the filler blocks blood flow to an area, and immediate medical attention is needed.
Persistent pain or discomfort
Although there may be some tenderness immediately after the procedure, continued or worsening pain is worrisome.
It becomes even more alarming when other symptoms like fever or significant redness accompany such pain.
Potential Factors Leading to Failed Nasolabial Fold Fillers
Knowing why a filler procedure failed may be important for future decision-making. Some usual causes of bad fillers are given below:
Novice or unqualified injector
Now, this is very important if you want to have a successful procedure. It should be done by a licensed practitioner who has a good record of successful procedures in the past. Honestly, this is not even up for debate because you won't get a successful procedure from a novice.
Incorrect filler selection
Every filler has its own unique properties, so using one for another may not give the expected outcome. E. g. if you use very thick/thin filler for your patient’s nasolabial folds, he/she will look unnatural.
Overfilling or underfilling
It is important to get the right amount when injecting fillers. An overfilled look may occur with too much filler, while inadequate filling may fail to provide the required correction.
Poor injection technique
The manner in which the filler is put into place matters a lot. Incorrect depth, uneven spread, or misplaced fillers can all result in less-than-optimal results and even pose some risks.
Allergic reactions or incompatibility
Although uncommon, some people may be allergic to certain types of fillers. This is more likely to occur with specific kinds of fillers and can cause swelling, inflammation, and other side effects.
Timeline for Assessing Nasolabial Fold Filler Results
Understanding the typical timeline for filler results can help you better evaluate your treatment outcome. We should know the reason why nasolabial fold filler gone wrong. Here's what you can expect:
Immediate post-treatment expectations
Right after injecting your filler, there might be some swelling redness as well as little bruises seen at the point of injection. Due to these temporary effects, the area intended for treatment may appear slightly overfilled. Be rest assured that this is normal and nothing to worry about now.
Short-term healing process (1-2 weeks)
Within the next 1-2 weeks, any initial swelling or bruising should go down. The filler takes its position during this period, and you will see how it worked out.
If you notice any unusual symptoms persisting beyond this period, it's advisable to contact your practitioner.
Long-term results (1-3 months)
At 1-3 months after treatment, you will be able to make a complete evaluation of your results. By then, the filler would have integrated fully with your tissues, and any remaining swellings would be resolved.
This is the best time to evaluate whether you're satisfied with the outcome or if you feel additional treatment may be needed.
What You Should Do When You Suspect the Nasolabial Fold Filler Gone Wrong
Follow these steps if you think there might be a problem with your dermal filler treatment:
Call your practitioner at once
In case of any unusual symptoms or dissatisfaction, call your doctor immediately. Early intervention may help reduce complications most of the time.
Photograph the problems
Ensure that you take well-lit photographs of the area in which the treatment was administered. This visual data can help the practitioner make a proper diagnosis when you cannot get through to an immediate consultation.
Discuss correction options
Depending on what went wrong, there could be different ways to correct it. Hyaluronidase injection dissolves fillers composed of hyaluronic acid, while other cases may require adding more filler or using different treatment approaches altogether.
Look for another point of view when necessary
If you feel that you are not getting enough information from your doctor or are not comfortable going back to them, seek a second opinion from another qualified healthcare provider preferably board-certified dermatologist or plastic surgeon.
How to Ensure Successful Nasolabial Fold Filler Treatments
To minimize the chances of problems and maximize results, knowing when the nasolabial fold filler gone wrong and the reason why nasolabial fold filler gone wrong.
think about:
Choosing a qualified and experienced practitioner
It is crucial to choose an experienced professional. Seek out a board-certified dermatologist, plastic and reconstructive surgery specialist, or other medical expert who has performed many facial filler injections.
Understanding the procedure and setting realistic expectations
Engage in a comprehensive discussion with your provider prior to receiving treatment. Talk about what you hope to achieve, the kind of filler being used, and what is realistically expected from this treatment.
Realizing that fillers can improve but not completely erase nasolabial folds is crucial for satisfaction with your results.
Following pre and post-treatment care instructions
Your adherence to the doctor’s advice before and after treatment will greatly affect the outcome.
This may involve refraining from certain drugs or supplements prior to the operation and following specific postoperative care measures aimed at ensuring quick recovery and good results.
Alternatives to Nasolabial Fold Fillers
Although dermal fillers are the most common solution for dealing with nasolabial folds, there are other options. Here are some of the alternatives:
Non-invasive options (e.g., facial exercises, skincare)
Facial exercises meant to strengthen the muscles around the nasolabial area work for some individuals. Also, an effective skincare program that enhances moisture and stimulates collagen can ameliorate these creases when done consistently.
Other cosmetic procedures (e.g., thread lifts, fat transfer)
Thread lift is one of the procedures that can lift the midface and, hence indirectly improve on the appearance of nasolabial fold. Alternatively, one may consider using his or her own fat for volume through a fat transfer which provides another long-term solution.
Surgical alternatives for severe cases
If there are very deep nasolabial folds or if non-surgical methods do not give positive outcomes, it may be necessary to think about such surgical operations for facelifts. All these options require consultation with a qualified plastic surgeon. It may be fail and we should know the reason why nasolabial fold filler gone wrong.
Conclusion
Alright, we've come to the end of this blog post. From all that we've said, it's easy to see that using fillers to treat nasolabial folds is a difficult task. Why? This is a procedure that requires attention to detail and experience. It may be fail and we should know the reason why nasolabial fold filler gone wrong.
It is important to note that although dermal filler injections are safe and provide good results in most cases when administered by experienced professionals, every cosmetic procedure carries some risk.
Ensure that you always prioritize your safety. Always do this procedure with an experienced and licenced professional not just anyone.
Now, to look younger without any flop or side effect, is best to use Diaminy fillers. Our fillers give you that unique youthful skin whilst keeping your natural look. With this, you don’t have to worry about a nasolabial fold filler flop. Knowing when the nasolabial fold filler failed and the reason why nasolabial fold filler gone wrong.
